2006-2007 Chevrolet Corvette C6 Base 6.0l V8 LS2 Engine Long Block Swap / 74K C6013

2006-2007 Chevrolet Corvette C6 Base 6.0l V8 LS2 Engine Long Block Swap

Donor Car:

2006 Chevrolet C6 Corvette Base Convertible – 74K

Functionality:

Removed from a 2006 Chevrolet Corvette C6 Convertible Base with 74k miles. Removed from a running and driving car, so this motor was able to be fully driven and tested before removal. Engine idled smoothly at 650 rpm with no smoking upon startup. We were able to fully rev the engine with no misfires or hesitations. Oil pump had consistent oil pressure throughout testing. We have performed a cylinder compression test with good results (Driver: 255-255-245-245 / Passenger: 255-245-250-245). The engine had some oil residue / leaks from the oil pan gasket, valve cover gasket, and surrounding the center valley cover. We suggest changing these gaskets, As well as any other easy to access seals while the engine is already removed from the vehicle.

Physical Condition:

Includes everything as pictured, nothing less, nothing more. Includes the intake manifold, throttle body, coil packs, wiring harness, ECU module (part # 12605731), power steering pump / reservoir, alternator, injectors, AC compressor, fuel rail, exhaust manifolds, and motor mount brackets. The factory harmonic balancer has been replaced with an aftermarket ATI superdamper as shown. There will be some components and hardware you will need to reuse from your existing vehicle.

Fits:

2006, 2007 Chevrolet Corvette C6 Base

Fitment Notes:

Removed from a 2006 C6 Base Convertible equipped with the automatic transmission. This engine can also be used for a manual transmission with some minor changes such as the flex plate, sensors, and wiring harness.

2006+ Corvette models were equipped with the updated 58x timing reluctor wheel. There are aftermarket solutions that allow 58x Engines to be used in 2005 Corvette models with the older 24x reluctor wheel. Please do your own research regarding this retrofit / modification prior to purchasing for a 2005 Corvette model.

We have included some components commonly used when swapping this engine into other vehicle. We have include the front accessory assemblies, motor mount brackets, throttle body, factory wiring harness, throttle pedal, and ECU. There still may be some additional components required to use this as a complete swap.

*** Please Read Shipping Details Below***

This item will ship on a pallet via Fedex Freight to the Continental 48 States, Mexico and Canada. Please add the item to the cart to see the exact shipping costs associated with it. There will be two options for shipping, one without a liftgate equipped truck and one with a liftgate. If you have a business address with a loading dock, forklift or other means of unloading the pallet off of the delivery truck you will not need a liftgate equipped truck for delivery. If you have a residential address or are unsure about unloading the pallet from the truck please refer to the weight of the shipment above on this listing page, so you can make the decision on whether you will need a liftgate or not. For residential deliveries Fedex will contact you, at the phone number provided, to schedule an appointment for delivery. As with all freight companies they deliver to the curb, not inside, so please plan accordingly for your delivery.

Warranty Information

This engine comes with a 90 day warranty that begins on the day the engine is received by the buyer. The warranty covers the engine block, crankshaft, pistons, rods, bearings, oil pump, cylinder head, head gasket, camshafts, valves and lifters against any defects that prevent the engine from operating as intended from the factory or make noises consistent with damaged engine internals ( rod knock, spun bearings, etc). Every engine we list on eBay has been fully run tested, compression tested and when possible test driven to make sure it runs smoothly, makes no odd noises and does not overheat.

What is not included in the warranty is common wear and tear items such as: timing belt, water pump, thermostat, spark plugs, spark plug wires, sensors and seals. While these items were in working condition at the time of testing, their lifespan is usually shorter than the internals of the engine and are therefore not covered under warranty. If any seals or gaskets are leaking at the time the engine is being tested and removed, or any sensors broken or defective, they will be noted in the item description. No labor, diagnostic or towing costs will be covered under warranty. In the event of a warranty claim, please be prepared to supply pictures, video and/or a statement from a shop/mechanic to validate the claim. This warranty is non-transferrable. It is only applicable to the original purchaser.

Situations that will void the warranty:

Overheating of the engine. We install “heat indicator tabs” on every engine prior to shipping that show when an engine has been operated at a temperature significantly higher than normal operating temperature. If these tabs show signs of overheating, the warranty will be void. If the engine in your car is being replaced due to damage from an overheating condition please locate and fix the source of the issue prior to running your new engine.

Not running fresh oil and oil filter in the engine (these engines ship drained of all fluids).

Installation of an aftermarket turbocharger, supercharger or Nitrous Oxide kit.